The volume program automatically starts watering until a certain volume measured by a flowmeter is reached. It allows you to choose when it starts, which days it runs, and what volume should be reached, so that the system manages it automatically.
New feature only available at cloud.spherag.com, not accessible from the APP.
- Go to the “Programs” section and click on the “Create Program”.
- Select the volume program option.
- Once inside “Create volume program”, fill in the first required fields, “Program name” and “Start time.”
- Indicate the days of the week on which you want the program to be active.
- Add the flowmeter from the list of installed flowmeters.
If the flowmeter belongs to an Atlas 2:
- The linked actuator will be selected automatically.
- Define the volume of the program. The volume will be rounded according to the flowmeter's pulse unit.
If the flowmeter belongs to an Atlas + or Atlas X:
- Select an actuator from those associated with the same Atlas as the flowmeter.
- Define the volume of the program. The volume will be rounded according to the flowmeter's pulse unit.
- (Optional) Set a maximum execution time (maximum time the program can be active). Even if the set volume is not reached, if the program exceeds this duration, the actuator will close.
Once all fields are completed, click on “Save.”
As with time programs, the volume program allows you to add conditions and edit the Water Budget through program settings.